Plateau
FrançaisReserve

3D printing studio / Tunisia

Your space. Your dimensions.

Modular storage, 3D printed to fit. Design your tray, choose your boxes, and we’ll make them here in Tunisia.

Design my tray Explore the parts

Configure in 3D. Reserve ahead of launch.

Product visualization: modular bins holding small tools and a cable inside a wooden drawer
Product visualization. Drawer and objects not included.
Gridfinity compatibleCustom dimensionsPrinted in Tunisia

01 / The parts

One system. Your setup.

Start with a base. Add your compartments. Give every part a place.

  • A bare tray, its grid empty

    Soon

    The bare tray

    The grid on its own, standard size or fitted to your space. Takes any Gridfinity-standard box.

  • A tray filled with boxes of several sizes

    Soon

    Tray and boxes

    The tray with the boxes you chose, ready to drop in.

  • A small three-drawer unit, the top drawer open on a tray and its boxes

    Soon

    A drawer unit

    A compact unit with its drawers already fitted out.

02 / From design to print

You configure. We print.

Design my tray

  1. Pick the size

    In 4.2 cm cells, or from the measurements of your space.

  2. Place your boxes

    Big or small, tall or low, with or without dividers.

  3. We print it

    3D printed in Tunisia, ready to drop in.

Modular tray / assembled view
Actual 3D model: seven storage bins assembled on a four-by-four baseplate
4 × 4 cells · 42 mm pitch
Made to fit. Made to rearrange.PLA / PETG

03 / The applications

Built around what you use.

A grid at the bottom, boxes that lock into it.

  • Drawer

    Worked out from your drawer's inside measurements.

  • Desk

    Pens, cables, USB sticks: a slot for everything.

  • Workbench

    Screws, bits, small parts: sorted and within reach.

  • Toolbox

    Compartments sized to your tools.

  • Storage box

    Components, beads, supplies: everything in its place.

Preparing to launch

Get in on the first print.

Tell us what you need. We’ll contact you when the shop opens.

Have a specific layout in mind? Attach your design directly from the 3D builder.

Phone or email, your choice.

For example 22 123 456. Outside Tunisia, start with +.

What interests you

Pick as many as you like.

04 / Good to know

FAQ

What does "Gridfinity-compatible" mean?

Gridfinity is an open modular storage standard created by Zack Freedman. Our trays and boxes follow its dimensions, so they work with standard Gridfinity parts. We are not affiliated with its creator.

Do I need to measure?

Not necessarily. Pick a size in cells, or give the inside measurements of your drawer or box: the tray is worked out to fit with 1 mm of play.

What is it made of?

PLA, a rigid plastic, and PETG where it gets hot. Not for food contact.

When will it be available?

Soon. Reserve your spot to be the first to know.